Jump to content

Hammered dulcimer

From Wikipedia, the free encyclopedia
(Redirected from Hammer dulcimer)
Hammered dulcimer
A musician playing a diatonic hammered dulcimer
String instrument
Other namesCimbalom
Dulcimer
Four-hammer dulcimer
Hammer dulcimer
de: Hackbrett
gr: Σαντούρι
it: Salterio
es: Dulcémele
uk: Tsymbaly
ro: Țambal
cs: Cimbál
pl: Cymbały
fa: Santoor, Santur
fr: Tympanon
zh: Yangqin
ko: Yanggeum
kh: ឃឹម Khim
vi: Tam Thập Lục
th: ขิม Khim
tt: чимбал çimbal
Classification Percussion instrument (chordophone), string instrument
Hornbostel–Sachs classification314.122-4
(Simple chordophone sounded by hammers)
DevelopedAntiquity
Related instruments
Alpine zither, Appalachian dulcimer, autoharp, board zither, concert zither, Psaltery, Tambourine de Bearn, Santur
Sound sample
Concertino for Santur and Orchestra, by Faramarz Payvar and Hossein Dehlavi.
Problems playing this file? See media help.

The hammered dulcimer (also called the hammer dulcimer) is a percussion-stringed instrument which consists of strings typically stretched over a trapezoidal resonant sound board. The hammered dulcimer is set before the musician, who in more traditional styles may sit cross-legged on the floor, or in a more modern style may stand or sit at a wooden support with legs. The player holds a small spoon-shaped mallet hammer in each hand to strike the strings. The Graeco-Roman word dulcimer ("sweet song") derives from the Latin dulcis (sweet) and the Greek melos (song). The dulcimer, in which the strings are beaten with small hammers, originated from the psaltery, in which the strings are plucked.[1]

Hammered dulcimers and other similar instruments are traditionally played in Iraq, India, Iran, Southwest Asia, China, Korea, and parts of Southeast Asia, Central Europe (Hungary, Slovenia, Romania, Slovakia, Poland, Czech Republic, Switzerland [particularly Appenzell], Austria and Bavaria), the Balkans, Eastern Europe (Ukraine and Belarus), and Scandinavia. The instrument is also played in the United Kingdom (Wales, East Anglia, Northumbria), and the United States, where its traditional use in folk music saw a revival in the late 20th century.[2]

History

[edit]

The santur, a type of hammered dulcimer, originates from the Middle East. The earliest evidence comes from Assyrian and Babylonian stone carvings dated to 669 BC, showing the instrument being played while hanging from the player's neck. This instrument was traded and travelled to different parts of the Middle East. Musicians modified the original design over the centuries, yielding a wide array of musical scales and tunings. The original santur was likely made with wood and stone and strung with goat intestines. The Babylonian santur was the ancestor of the harp, yangqin, harpsichord, qanun, cimbalom and hammered dulcimers.[3]

In Western Europe, a hammered dulcimer first appears in textual and iconographic sources from the early 15th century.[4] The hammered dulcimer was extensively used during the Middle Ages in England, France, Italy, Germany, the Netherlands, and Spain.

Strings and tuning

[edit]
Major scale pattern on a diatonic hammered dulcimer tuned in 5ths
An early version of the hammered dulcimer accompanied by lute, tambourine and bagpipe
The Salzburger hackbrett, a chromatic version

A dulcimer usually has two bridges, a bass bridge near the right and a treble bridge on the left side. The bass bridge holds up bass strings, which are played to the left of the bridge. The treble strings can be played on either side of the treble bridge. In the usual construction, playing them on the left side gives a note a fifth higher than playing them on the right of the bridge.

The dulcimer comes in various sizes, identified by the number of strings that cross each of the bridges. A 15/14, for example, has 15 strings crossing the treble bridge and 14 crossing the bass bridge, and can span three octaves. The strings of a hammered dulcimer are usually found in pairs, two strings for each note (though some instruments have three or four strings per note). Each set of strings is tuned in unison and is called a course. As with a piano, the purpose of using multiple strings per course is to make the instrument louder, although as the courses are rarely in perfect unison, a chorus effect usually results like a mandolin. A hammered dulcimer, like an autoharp, harp, or piano, requires a tuning wrench for tuning, since the dulcimer's strings are wound around tuning pins with square heads. (Ordinarily, 5 mm "zither pins" are used, similar to, but smaller in diameter than piano tuning pins, which come in various sizes ranging upwards from "1/0" or 7 mm.)

The strings of the hammered dulcimer are often tuned according to a circle of fifths pattern.[5][6] Typically, the lowest note (often a G or D) is struck at the lower right-hand of the instrument, just to the left of the right-hand (bass) bridge. As a player strikes the courses above in sequence, they ascend following a repeating sequence of two whole steps and a half step. With this tuning, a diatonic scale is broken into two tetrachords, or groups of four notes. For example, on an instrument with D as the lowest note, the D major scale is played starting in the lower-right corner and ascending the bass bridge: D – E – F♯ – G. This is the lower tetrachord of the D major scale. At this point the player returns to the bottom of the instrument and shifts to the treble strings to the right of the treble bridge to play the higher tetrachord: A – B – C♯ – D. The player can continue up the scale on the right side of the treble bridge with E – F♯ – G – A – B, but the next note will be C, not C♯, so he or she must switch to the left side of the treble bridge (and closer to the player) to continue the D major scale. See the drawing on the left above, in which "DO" would correspond to D (see Movable do solfège).

The shift from the bass bridge to the treble bridge is required because the bass bridge's fourth string G is the start of the lower tetrachord of the G scale. The player could go on up a couple notes (G – A – B), but the next note will be a flatted seventh (C natural in this case), because this note is drawn from the G tetrachord. This D major scale with a flatted seventh is the mixolydian mode in D.

The same thing happens as the player goes up the treble bridge – after getting to La (B in this case), one has to go to the left of the treble bridge. Moving from the left side of the bass bridge to the right side of the treble bridge is analogous to moving from the right side of the treble bridge to the left side of the treble bridge.

The whole pattern can be shifted up by three courses, so that instead of a D-major scale one would have a G-major scale, and so on. This transposes one equally tempered scale to another. Shifting down three courses transposes the D-major scale to A-major, but of course the first Do-Re-Mi would be shifted off the instrument.

This tuning results in most, but not all, notes of the chromatic scale being available. To fill in the gaps, many modern dulcimer builders include extra short bridges at the top and bottom of the soundboard, where extra strings are tuned to some or all of the missing pitches. Such instruments are often called "chromatic dulcimers" as opposed to the more traditional "diatonic dulcimers".

The tetrachord markers found on the bridges of most hammered dulcimers in the English-speaking world were introduced by the American player and maker Sam Rizzetta in the 1960s.[7]

In the Alps there are also chromatic dulcimers with crossed strings, which are in a whole tone distance in every row. This chromatic Salzburger hackbrett was developed in the mid 1930s from the diatonic hammered dulcimer by Tobi Reizer and his son along with Franz Peyer and Heinrich Bandzauner. In the postwar period it was one of the instruments taught in state-sponsored music schools.[8]

Hammered dulcimers of non-European descent may have other tuning patterns, and builders of European-style dulcimers sometimes experiment with alternate tuning patterns.

Hammers

[edit]

The instrument is referred to as "hammered" in reference to the small mallets (referred to as hammers) that players use to strike the strings. Hammers are usually made of wood (most likely hardwoods such as maple, cherry, padauk, oak, walnut, or any other hardwood), but can also be made from any material, including metal and plastic. In the Western hemisphere, hammers are usually stiff, but in Asia, flexible hammers are often used. The head of the hammer can be left bare for a sharp attack sound, or can be covered with adhesive tape, leather, or fabric for a softer sound. Two-sided hammers are also available. The heads of two sided hammers are usually oval or round. Most of the time, one side is left as bare wood while the other side may be covered in leather or a softer material such as piano felt.[citation needed]

Several traditional players have used hammers that differ substantially from those in common use today. Paul Van Arsdale (1920–2018), a player from upstate New York, used flexible hammers made from hacksaw blades, with leather-covered wooden blocks attached to the ends (these were modeled after the hammers used by his grandfather, Jesse Martin). The Irish player John Rea (1915–1983) used hammers made of thick steel wire, which he made himself from old bicycle spokes wrapped with wool. Billy Bennington (1900–1986), a player from Norfolk, England, used cane hammers bound with wool.

The piano, like the dulcimer, uses a hammering action to strike the strings.

A piano hammering action

Variants and adaptations

[edit]
Tuning of a hammered dulcimer (southeastern Slovenia)

Versions of the hammered dulcimer, each of which has its own distinct manner of construction and playing style, are used throughout the world:

(རྒྱུད་མང་, literally "many strings")


See also

[edit]

References

[edit]
  1. ^ "Definition of DULCIMER". Merriam-Webster, Incorporated. Retrieved 29 July 2012.
  2. ^ Groce, Nancy. The Hammered Dulcimer in America. Washington, DC: Smithsonian, 1983, pp. 72-73.
  3. ^ Touma, Habib Hasan (1996). The Music of the Arabs. Portland, Oregon: Amadeus Press. ISBN 0-931340-88-8.
  4. ^ Gifford, Paul M. (2001-06-13). The Hammered Dulcimer (First ed.). Lanham, Md. London: Scarecrow Press. ISBN 978-0-8108-3943-4.
  5. ^ Rizzetta, Sam. "Hammer Dulcimer: History and Playing". Encyclopedia Smithsonian. Smithsonian Institution. Retrieved 3 June 2013.
  6. ^ "Traditional or Fifth-Interval Tuning". Dusty Strings. Retrieved 6 June 2022.
  7. ^ Rizzetta, Sam. "Luthier Spotlight Sam Rizzetta and Music, Dulcimer Sessions". Encyclopedia Smithsonian. Mel Bay.
  8. ^ Gifford, Paul M., The Hammered Dulcimer: A History, Lanham, Maryland: Scarecrow Press, 2001. Page 81.

Further reading

[edit]
[edit]
Wikimedia Commons has media related to Hammered dulcimers.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Hammered_dulcimer&oldid=1241812266"