Secant line

In geometry, a secant is a line that intersects a curve at a minimum of two distinct points.^[1] The word secant comes from the Latin word secare, meaning to cut.^[2] In the case of a circle, a secant intersects the circle at exactly two points. A chord is the line segment determined by the two points, that is, the interval on the secant whose ends are the two points.^[3]

Circles

A straight line can intersect a circle at zero, one, or two points. A line with intersections at two points is called a secant line, at one point a tangent line and at no points an exterior line. A chord is the line segment that joins two distinct points of a circle. A chord is therefore contained in a unique secant line and each secant line determines a unique chord.

In rigorous modern treatments of plane geometry, results that seem obvious and were assumed (without statement) by Euclid in his treatment, are usually proved.

For example, Theorem (Elementary Circular Continuity):^[4] If ${\mathcal {C}}$ is a circle and $\ell$ a line that contains a point $A$ that is inside ${\mathcal {C}}$ and a point $B$ that is outside of ${\mathcal {C}}$ then $\ell$ is a secant line for ${\mathcal {C}}$ .

In some situations phrasing results in terms of secant lines instead of chords can help to unify statements. As an example of this consider the result:^[5]

If two secant lines contain chords

AB

and

CD

in a circle and intersect at a point

P

that is not on the circle, then the line segment lengths satisfy

AP \cdot PB = CP \cdot PD

.

If the point $P$ lies inside the circle this is Euclid III.35, but if the point is outside the circle the result is not contained in the Elements. However, Robert Simson following Christopher Clavius demonstrated this result, sometimes called the intersecting secants theorem, in their commentaries on Euclid.^[6]

Curves

For curves more complicated than simple circles, the possibility that a line that intersects a curve in more than two distinct points arises. Some authors define a secant line to a curve as a line that intersects the curve in two distinct points. This definition leaves open the possibility that the line may have other points of intersection with the curve. When phrased this way the definitions of a secant line for circles and curves are identical and the possibility of additional points of intersection just does not occur for a circle.

Secants and tangents

Secants may be used to approximate the tangent line to a curve, at some point $P$ , if it exists. Define a secant to a curve by two points, $P$ and $Q$ , with $P$ fixed and $Q$ variable. As $Q$ approaches $P$ along the curve, if the slope of the secant approaches a limit value, then that limit defines the slope of the tangent line at $P$ .^[1] The secant lines $PQ$ are the approximations to the tangent line. In calculus, this idea is the geometric definition of the derivative.

The tangent line at point $P$ is a secant line of the curve

A tangent line to a curve at a point $P$ may be a secant line to that curve if it intersects the curve in at least one point other than $P$ . Another way to look at this is to realize that being a tangent line at a point $P$ is a local property, depending only on the curve in the immediate neighborhood of $P$ , while being a secant line is a global property since the entire domain of the function producing the curve needs to be examined.

Sets and $n$ -secants

The concept of a secant line can be applied in a more general setting than Euclidean space. Let $K$ be a finite set of $k$ points in some geometric setting. A line will be called an $n$ -secant of $K$ if it contains exactly $n$ points of $K$ .^[7] For example, if $K$ is a set of 50 points arranged on a circle in the Euclidean plane, a line joining two of them would be a 2-secant (or bisecant) and a line passing through only one of them would be a 1-secant (or unisecant). A unisecant in this example need not be a tangent line to the circle.

This terminology is often used in incidence geometry and discrete geometry. For instance, the Sylvester–Gallai theorem of incidence geometry states that if $n$ points of Euclidean geometry are not collinear then there must exist a 2-secant of them. And the original orchard-planting problem of discrete geometry asks for a bound on the number of 3-secants of a finite set of points.

Finiteness of the set of points is not essential in this definition, as long as each line can intersect the set in only a finite number of points.

References

^ ^a ^b Protter, Murray H.; Protter, Philip E. (1988), Calculus with Analytic Geometry, Jones & Bartlett Learning, p. 62, ISBN 9780867200935.
^ Redgrove, Herbert Stanley (1913), Experimental Mensuration: An Elementary Test-book of Inductive Geometry, Van Nostrand, p. 167.
^ Gullberg, Jan (1997), Mathematics: From the Birth of Numbers, W. W. Norton & Company, p. 387, ISBN 9780393040029.
^ Venema, Gerard A. (2006), Foundations of Geometry, Pearson/Prentice-Hall, p. 229, ISBN 978-0-13-143700-5
^ Jacobs, Harold R. (1974), Geometry, W. H. Freeman & Co., p. 482, ISBN 0-7167-0456-0
^ Heath, Thomas L. (1956), The thirteen books of Euclid's Elements (Vol. 2), Dover, p. 73
^ Hirschfeld, J. W. P. (1979), Projective Geometries over Finite Fields, Oxford University Press, p. 70, ISBN 0-19-853526-0

External links

Weisstein, Eric W. "Secant line". MathWorld.

[cag-1] Protter, Murray H.; Protter, Philip E. (1988), Calculus with Analytic Geometry, Jones & Bartlett Learning, p. 62, ISBN 9780867200935.

[2] Redgrove, Herbert Stanley (1913), Experimental Mensuration: An Elementary Test-book of Inductive Geometry, Van Nostrand, p. 167.

[3] Gullberg, Jan (1997), Mathematics: From the Birth of Numbers, W. W. Norton & Company, p. 387, ISBN 9780393040029.

[4] Venema, Gerard A. (2006), Foundations of Geometry, Pearson/Prentice-Hall, p. 229, ISBN 978-0-13-143700-5

[5] Jacobs, Harold R. (1974), Geometry, W. H. Freeman & Co., p. 482, ISBN 0-7167-0456-0

[6] Heath, Thomas L. (1956), The thirteen books of Euclid's Elements (Vol. 2), Dover, p. 73

[7] Hirschfeld, J. W. P. (1979), Projective Geometries over Finite Fields, Oxford University Press, p. 70, ISBN 0-19-853526-0

[1]

[2]

[3]

[4]

[5]

[6]

[7]

v t e Calculus
Precalculus	Binomial theorem Concave function Continuous function Factorial Finite difference Free variables and bound variables Graph of a function Linear function Radian Rolle's theorem Secant Slope Tangent
Limits	Indeterminate form Limit of a function One-sided limit Limit of a sequence Order of approximation (ε, δ)-definition of limit
Differential calculus	Derivative Second derivative Partial derivative Differential Differential operator Mean value theorem Notation Leibniz's notation Newton's notation Rules of differentiation linearity Power Sum Chain L'Hôpital's Product General Leibniz's rule Quotient Other techniques Implicit differentiation Inverse functions and differentiation Logarithmic derivative Related rates Stationary points First derivative test Second derivative test Extreme value theorem Maximum and minimum Further applications Newton's method Taylor's theorem Differential equation Ordinary differential equation Partial differential equation Stochastic differential equation
Integral calculus	Antiderivative Arc length Riemann integral Basic properties Constant of integration Fundamental theorem of calculus Differentiating under the integral sign Integration by parts Integration by substitution trigonometric Euler Tangent half-angle substitution Partial fractions in integration Quadratic integral Trapezoidal rule Volumes Washer method Shell method Integral equation Integro-differential equation
Vector calculus	Derivatives Curl Directional derivative Divergence Gradient Laplacian Basic theorems Line integrals Green's Stokes' Gauss'
Multivariable calculus	Divergence theorem Geometric Hessian matrix Jacobian matrix and determinant Lagrange multiplier Line integral Matrix Multiple integral Partial derivative Surface integral Volume integral Advanced topics Differential forms Exterior derivative Generalized Stokes' theorem Tensor calculus
Sequences and series	Arithmetico-geometric sequence Types of series Alternating Binomial Fourier Geometric Harmonic Infinite Power Maclaurin Taylor Telescoping Tests of convergence Abel's Alternating series Cauchy condensation Direct comparison Dirichlet's Integral Limit comparison Ratio Root Term
Special functions and numbers	Natural logarithm Exponential function Stirling's approximation Bernoulli numbers e (mathematical constant)
History of calculus	Adequality Brook Taylor Colin Maclaurin Generality of algebra Gottfried Wilhelm Leibniz Infinitesimal Infinitesimal calculus Isaac Newton Fluxion Law of Continuity Leonhard Euler Method of Fluxions The Method of Mechanical Theorems
Lists	List of limits List of derivatives List of integrals
Miscellaneous topics	Complex calculus Contour integral Differential geometry Manifold Curvature of curves of surfaces Tensor Euler–Maclaurin formula Gabriel's horn Integration Bee Proof that 22/7 exceeds π Regiomontanus' angle maximization problem Steinmetz solid